Home » Products » Other Products » Pneumatic Dust Control Products

Pneumatic Dust Control Products

Pneumatic Dust Control (PDC) products, now provided by Nederman MikroPul, offer portable, inline conveyance solutions for the oil and gas exploration industry, including oil rigs, supply barges, rail cars, and reserve pits closings; the environmental remediation industry; and other industrial plants.

PDC Vent Line Filter

The PDC Vent Line Filter is used to capture dust particles that are normally vented to the atmosphere when a silo or receiving tank is filled pneumatically. The centrifuge process of the cyclone separator, incorporated in the filter’s lower body below the filter inlet, allows the product to fall out of the product air stream by gravity. The conveyance air is then filtered through the‚Ä®fine filter bag section, located above the cyclone separator, before it is released to the atmosphere. Product particles are captured within the filter and returned when the filter is in the purge mode for proper storage and use. The result is a safe working environment, protecting personnel and equipment, with no product loss or pollution.

PDC Ashing Filter

The PDC Ashing Filter is used to deposit fly ash, cement, kiln dust, and other dry powder products into open pits and sludge ponds or environmental roll-on roll-off boxes, barges, and other enclosures. The cyclone separator allows the product to fall out of the product/air stream by centrifugal force and gravity. The conveyance air is filtered through the fine filter bag housing before it is released to the atmosphere. Product takes one path while conveyance air takes another. The result is a safe working environment, protecting personnel and equipment, with no product loss or pollution.

Barge Dust Collector

The Barge Dust Collector is a portable unit for use on container vessels. It filters air as products are pneumatically conveyed into the vessel. A motor and fan mounted on the filter body maintains a negative draft inside the receiving vessel. Air is filtered to the atmosphere dust free as any airborne product is suppressed and contained in the shipping or storage vessel.

Product Reclaim Unit

The PDC Product Reclaim Unit has been designed to clean, unload, transfer, and reclaim most dry powder or abrasive products. It incorporates a positive displacement blower and the patented PDC Vent Line filter. The unit conveys dry powder or abrasive products by vacuum, while removing the dust and returning the clean product under pressure for re-use. As a result, the costly waste of products and labor used in handling the products is eliminated.

Mud Hopper Dust Hood

The Mud Hopper Dust Hood is designed to enclose and maintain a negative draft over the hopper. Chemical sacks can then be safely opened and emptied. Personnel within the vicinity are protected from airborne chemical. Also, equipment is protected from chemical contamination. For additional information and videos, please visit our Pneumatic Dust Control website

Downloadable Documents

Pneumatic Dust Control